# GEMO Project Design Code

### Project / design- number code

[![image.png](https://bookstack.gemo-group.com/uploads/images/gallery/2024-08/scaled-1680-/Qzi3hnJi14wCLeNK-image.png)](https://bookstack.gemo-group.com/uploads/images/gallery/2024-08/Qzi3hnJi14wCLeNK-image.png)

**note**:

- <span style="color: rgb(0, 0, 0);">"P" stands for "project", is used for new inqueries and managed the sample production</span>
- <span style="color: rgb(0, 0, 0);">"E" stands for PPAP, managed the Q-documents</span>
- <span style="color: rgb(0, 0, 0);">"C" stands for calculation, different variations can be calculated via FEPA</span>
- <span style="color: rgb(0, 0, 0);">"D" stands for "design change" of series production.</span>  
    <span style="color: rgb(0, 0, 0);"> If you deliver series parts and the design will be change than you take the series part number put an "D" in front of the number and change the length indication (/……) into a variant number (-001)</span>
- <span style="color: rgb(0, 0, 0);">"R" stands for "Rework" </span>  
    <span style="color: rgb(0, 0, 0);">is use for parts that are reworked, do the same procedure as like as for the "D" part</span>

### <span style="color: rgb(0, 0, 0);">Project- and part number procedure (flex shaft)</span>

[![image.png](https://bookstack.gemo-group.com/uploads/images/gallery/2024-08/scaled-1680-/Ck4Gqmg1obBvhOh2-image.png)](https://bookstack.gemo-group.com/uploads/images/gallery/2024-08/Ck4Gqmg1obBvhOh2-image.png)