Article numbers
GEMO Project Design Code
Project / design- number code
note:
- "P" stands for "project", is used for new inqueries and managed the sample production
- "E" stands for PPAP, managed the Q-documents
- "C" stands for calculation, different variations can be calculated via FEPA
- "D" stands for "design change" of series production.
If you deliver series parts and the design will be change than you take the series part number put an "D" in front of the number and change the length indication (/……) into a variant number (-001) - "R" stands for "Rework"
is use for parts that are reworked, do the same procedure as like as for the "D" part